Selecting competition

Selecting competition

First step, when working with competitions is selecting one. Only after a competition is selected and data is synchronized you can register or view athletes. To view the list of available competitions first synchronize by selecting Data - Synchronize all then click on »Select Competition«. A pop up window will show and you can choose the competition from the main list.



To load competition’s data, you must double click on selected competition.
This will trigger the data to refresh. After Synchronization is complete, click OK and competition’s data will be shown on the main screen.




    • Related Articles

    • First start

      Startup and registration In order to work with the JudoManager Desktop, you must first have a valid username, password and enabled API access. The credentials are the same as those used to access JudoManager Admin. If you don't have a valid ...
    • Sample JudoManager competition

      Here you will find a simple step by step example of a typical competition.  Creating the competition First step is to create a competition. This is done through JudoManager Admin. You will need valid credentials and at least country administrator ...
    • Software installation

      1. Double click software installer (JudoManagerSetup.exe) - For registered users, the updated version of JudoManager Desktop can be found on the JudoManager Admin website. If you cannot acces the software contact your web administrator. 2. Select ...
    • Detail menu

      Here you can find general competition settings and information. Name of competition, date from, date to and place are read-only fields. If you need to change any of them, navigate to JudoManager Admin (online) and update data.   Competition level ...
    • Introduction to the Ribbon menu

      In this article, we will take a look at program tabs, views, and command groups. JudoManager desktop uses a ribbon system, similar to one in office products. It contains two tabs - home and data, each with several command groups. You will use these ...