WeighIn settings
You can launch the WeighIn app either from the desktop shortcut or via the Windows Start menu.
2. Basic Settings
In this section, you define how the WeighIn module connects to the JudoManager Desktop application (server).
2.1 Local Location
If the computer running the WeighIn module is on the same local network as the server computer, select Local location and enter the IP address of the server. You can also click Search to automatically browse for available servers in the network. Once selected, click Test to verify the connection. Note: In the JudoManager Desktop application, the Service (top right corner) must be set to Running. Otherwise, weigh-in data will not be synchronized.
2.2 Remote Location
If the computer is not on the same local network as the server, choose Remote location. After confirming, you will be prompted to log in with your user credentials. Upon successful login, the Select competition window will appear. Select your competition, and the main view will populate with the list of registered athletes. In this setup, each weigh-in will be synchronized to the cloud database, and subsequently to the server computer.
2.3 Scale COM Port
Select the COM port that the scale is connected to. The application will automatically detect an active COM port by default.
3. Advanced Settings
This section allows you to further customize the behavior of the WeighIn module:
-
Language – Overrides the default language. If using Local location, it follows the JudoManager Desktop language. If on Remote, the default is English.
-
Main server – Defines the port used to connect to the server computer.
-
Synchronization – Enables Auto synchronization and allows you to set the interval. When enabled, new weights will automatically be pushed to the JudoManager Desktop application.
-
Weighing scale (Baud rate) – Sets the Baud rate for the scale connection. Check your scale’s user manual to find the correct Baud rate. The default is 9600, which is the most commonly used.
4. Additional Information
As soon as the JudoManager server is confirmed in the settings, the athlete data will be automatically loaded into the WeighIn module. To learn more about how to perform weigh-ins, scan barcodes, and manage weight entries, please refer to the Working with the WeighIn Module article.
Related Articles
Working with the WeighIn module
The WeighIn module is a specialized part of the JudoManager software designed for entering and managing athlete weigh-ins before the start of a competition. It allows for fast, accurate, and organized recording of athletes' body weight and enables ...Settings view
Settings General settings are managed in the backstage view. Click on backstage - settings. In Settings view, you can modify global application settings: Language Change application and output language. This option applies also for code tables like ...Working with the Accreditation module
Before you can use the Accreditation module, you first need to set it up. This is done by pressing the Settings button in the Options command group in the Accreditation module application. Start by opening the Accreditation app via shortcut or ...Scoreboard settings
Scoreboard settings menu allows you to define how the Scoreboard module will behave. Scoreboard module will read central settings and modify output. Automatic reading from JudoManager Desktop application (server) can be disabled - you can read more ...Draw config
1. Repechage type: Choose your Repechage types from the list. You can choose between Double repechage, Best-8, No repechage , Single repechage, Full repechage. Draw type: Choose your draw type from the list where you can choose between Standard, ...