Overview and System Setup
Quick Guide: System Setup and Pre-Event Test
Prepare, connect and verify the Judo Graphics (CG) system before competition day. Complete the detailed installation procedure first. This guide covers the essential preparation and final system test. Judo Graphics are available in two versions: IJF ...
Network Setup
This chapter guides you through the practical setup of your Local Area Network (LAN), device IP addressing, and the software configuration required for proper data routing. Configure JudoNet to Send Data JudoNet must be properly configured for UDP ...
Software Installation
Prerequisites Windows The Judo Graphics system is supported on Windows 10 Pro 22H2 and Windows 11 Pro. Windows 11 Pro is recommended for new installations. If Windows 10 Pro is used, ensure that the computer is covered by your organization’s approved ...
Network Requirements
Network Basics The basic network necessary for the Judo Graphics (CG) system runs on a Local Area Network (LAN). A complete production environment connects several key software components: the JudoManager (JM) server database, individual Scoreboard ...
Hardware Requirements
Hardware Guidelines This section defines the computer hardware necessary to run Judo Graphics (CG) reliably. CG includes the controller interface (CGplay) and the rendering engine (CasparCG) that draws your templates. Because this software actively ...
CG System Overview
What are Judo Graphics (CG)? Judo Graphics (often called CG, short for Character Generator) is the software that renders the live graphics you see on screen during judo streams. It is made up of two main parts: a controller interface (CGplay) and a ...